CNC MILLING MACHINES BED TYPE SERIES
CNC MILLING MACHINES BED TYPE SERIES
The best economic choice
with precision replace machining center function.
| MODEL | UNIT | CNC-24MA | CNC-36MB | CNC-46MB | |
| Travel | X/Y/Z axis | mm | 750/400/530 | 1000/500/570 | 1300/500/570 |
| Spindle nose to table surface | mm | 100-670 | 90-660 | ||
| Spindle center to column surface | mm | 470 | 540 | ||
| X/Y/Z way span | mm | 286 / 390 / 420 | 306 / 620 / 470 | ||
| Position/Repeatability accuracy | mm | ±0.005 | |||
| Ball bar accuracy | mm | ≦0.01 | |||
| Spindle | Spindle taper | BT-40 | |||
| Spindle transmission | Belt | ||||
| Spindle speed | rpm | 8000 / (OP10000) | |||
| Controller | CNC control | As customer’s choice | |||
| Spindle motor | kw | 5.5/7.5 | |||
| X/Y/Z motor | kw | 1.0/1.0/1.0 | 1.3/1.3/1.3 | ||
| Table | Table size (WxL) | mm | 320 x 1270 | 400 x 1270 | 400 x 1500 |
| T-slots(Widthx No.xPitch) | mm | 16 x 4 x 63 | 16 x 5 x 63 | ||
| Table load | kg | 500 | 700 | ||
| Feed | X/Y/Z Rapid feed rate | m/min | 7/7/7 | ||
| Cutting feed rate | m/min | 1-4000 | |||
| Min. input increment | mm | 0.01 | |||
| Magazine | Max. tool dia./with adjacent tool | mm | φ 100 | ||
| Max. tool weight | kg | 7 | |||
| Max. tool length | mm | 250 | |||
| Tool selection | Carousel type (OP:Automatic random Arm type) | ||||
| Tool Capacity | 16 (OP:24) | ||||
| Pull stud | degree | 45° | |||
| Tool Changing time (T. to T.) | sec | 2.5-3.4 (arm type) | |||
| Others | Spindle oil cooler | l | 5 | ||
| Lubrication capacity | l | 2 | |||
| Heat exchanger | watt | 40 x 2 | |||
| Coolant tank | l | 40 | 90 | ||
| Pneumatic unit | kg/cm2 | 6 | |||
| Power | kva | 10 | 13 | ||
Weight & Dimension | N.W./G.W.(approximate) | kg | 2500/2700 | 3700/3900 | 3900/4100 |
| Floor space(L x W x H) | m | 3.24 x 3.22 x 2.68 | 4.29 x 3.25 x 2.73 | 7.27 x 4.09 x 2.99 | |
| Packing(L x W x H) | m | 2.28 x 2.69 x 2.55 | 2.28 x 3.35 x 2.55 | 2.28 x 3.87 x 2.55 | |
Standard Accessories | (1) Belt drive XYZ axis (2) M.P.G XYZ axis (3) Spindle air blast (4) Spindle chiller unit (5) Automatic lubrication system (6) Coolant unit (7) Counting balance (8) Air and washing gun (9) Pendent operation cabinet | (10) Working Lamp Alarm light (11) RS-232 interface +10M cables (12) Heat exchanger on electric cabinet (13) M30 auto power off (14) Leveling pads and adjusting screws (15) Operating manual and part list (16) Spindle voice-proof (17) Precision report |
Optional Accessories | (a) Cooling ring around spindle (b) Coolant through spindle system (c) Chip conveyor (d) BT-40 to BT-50 (e) Upgrade spindle motor (f) Oil skimmer | (g) Oil tool holder (h) Enther + 256MB card (i) 16T carousel ATC (j) 24T/30T Arm type ATC (k) Count-weight of atm press with tank (l) 10000/12000/15000/24000RPM BT-40 only |