Horizontal Boring Milling Machine
Horizontal Boring Milling Machine
| MODEL | UNIT | MH-206 / 306 / 406 / 606 | MH-208 / 308 / 408 / 608 | |
| Travel | X axis | mm | 2000/3000/4000/6000 | 2000/3000/4000/6000 |
| Y/Z axis | mm | 550 / 600 | 700 / 800 | |
| Spindle nose to table surface | mm | 120-670 | 120-620 | |
| Spindle center to column surface | mm | 550 | 750 | |
| X/Y/Z way span | mm | 1100 / 550 / 550 | 1500 / 550 / 550 | |
| Position/Repeatability accuracy | mm | ±0.005 | ||
| Ball bar accuracy | mm | ≦0.01 | ||
| CP.manua | HN uivea | |||
| CP.manua | HN uivea | |||
| Spindle | Spindle taper | BT-50 | ||
| Spindle transmission | Direct drive 1,000(o.p.:ZF GERD box) | |||
| Spindle speed | rpm | st Hi/Low 6000(op 8000)/ op ZF Gear 6000-8000rpm | ||
| Controller | CNC control | As customer’s choice | ||
| Spindle motor | kw | 15/18.5 | ||
| X/Y/Z motor | kw | 7 / 7 / 8 | ||
| Table | Table size (WxL) | mm | 2500/3650/4800/6500x600 | 2500/3650/4800/6500x800 |
| T-slots(Widthx No.xPitch) | mm | 18 x 5 x 100 | 18 x 8 x 100 | |
| Feed | X/Y/Z Rapid feed rate | m/min | 24/24/24 | |
| Cutting feed rate | m/min | 1-12 | ||
| Min. input increment | mm | 0.001 | ||
| Magazine | Max. tool dia./with adjacent tool | mm | φ 110 ( φ 220) | |
| Max. tool weight | kg | 15 | ||
| Max. tool length | mm | 350 | ||
| Tool selection | Automatic random | |||
| Tool Capacity | 40 | |||
| Pull stud | degree | 45° | ||
| Tool Changing time (T. to T.) | sec | 7.5 | ||
| Motor | Spindle oil chiller | l | 40 | |
| Lubrication capacity | l | 4 | ||
| Heat exchanger | watt | 40 x 2 | ||
| Coolant tank | l | 300/350/400/450 | 300/350/400/450 | |
| Pneumatic unit | kg/cm2 | 6 | ||
| Power | kva | 45 | 50 | |
Weight & Dimension | N.W./G.W.(approximate) | kg | 14000/18000/22000/30000 | 18000/24000/30000/42000 |
| Packing(L x W x H) | m | 6.2/7.2/8.2/10.2 x 3.4 x 3.1 | 6.2/7.2/8.2/10.2 x 3.6 x 3.3 | |
| Floor space(L x W x H) | m | 6.2/7.2/8.2/10.2 x 3.4 x 3.1 | 6.2/7.2/8.2/10.2 x 3.6 x 3.3 | |
Standard Accessories | (1) Direct-coupled drive XYZ axis (2) M.P.G (3) Full splash guard (4) Spindle direct drive 10,000RPM (5) Spindle air blast (6) Spindle chiller unit (7) Spindle sound-proof (8) Automatic lubrication system (9) Coolant ring around spindle (10) XYZ roller type guide way (11) Air and washing gun | (12) Wash down nozzles (13) Halogen working lamp&alarm light (14) RS-232 interface +10M cables (15) Heat exchanger on electric cabinet (16) M30 auto power off (17) Leveling pads and adjusting screws (18) Tool box with adjusting tools (19) Operating manual and part list (20) Rigid tapping (21) Chain type chip conveyor (22) Chip auger |
Optional Accessories | (a) Coolant through spindle (b) C.T.S with separate coolant tank (100L) (c) Upgrade spindle motor (d) 12,000/15,000/24,000 RPM HSK (e) Scraper type chip conveyor (f) Oil skimmer (g) Voltage regulator (h) Transformer (i) Seaworthy packing | |