| MODEL | UNIT | MV-86P | MV-86U | |
| Travel | X/Y/Z axis | mm | 800/600/600 | 500/600/550 |
| Spindle nose to table | mm | 210-810 | 170-620 | |
| Spindle center to column surface | mm | 665 | 750 | |
| X/Y/Z way span | mm | 800 / 500 / 440 | ||
| Position/Repeatability accuracy | mm | ±0.005 | ||
| Ball bar accuracy | mm | ≦0.01 | ||
| Spindle | Spindle taper | BT-40 (OP-50) | ||
| Spindle transmission | Direct-coupled | |||
| Spindle speed | rpm | 10000 | ||
| Controller | CNC control | As customer’s choice | ||
| Spindle motor | kw | 11/15 | ||
| X/Y/Z motor | kw | 4 / 4 / 7 | ||
| Table | Table size (WxL) | mm | 900x600x2 | 900x600x φ400 |
| T-slots(Widthx No.xPitch) | mm | 18 x 5 x 125 (φ400xH300) | ||
| Table load (V/H) | kg | 400 x 2(200 / 150) | ||
| Feed | X/Y/Z Rapid feed rate | m/min | 36/36/30 | |
| Ballscrew OD/pitch | mm | φ50Xφ50Xφ50 | ||
| X/Y/Z linear way | mm | M55XM55XM55 | ||
| Cutting feed rate | m/min | 1-15 | ||
| Min. input increment | mm | 0.001 | ||
| Magazine | Max. tool dia./with adjacent tool | mm | φ 135 / φ 77.5 | |
| Max. tool weight 40/50 | kg | 7 (15) | ||
| Max. tool length 40/50 | mm | 300 / 400 | ||
| Tool selection | Automatic random | |||
| Tool Capacity | 24/30/40 | |||
| Pull stud | degree | 45° | ||
| Tool Changing time (T. to T.) | sec | 2.5 | ||
| Motor | Spindle oil chiller | l | 40 | |
| Lubrication capacity | l | 4 / 250 | ||
| Heat exchanger | watt | 70 | ||
| Coolant tank | l | 400 | ||
| Pneumatic unit | kg/cm2 | 6 | ||
| Power | kva | 35 | ||
Weight & Dimension | N.W./G.W.(approximate) | kg | 11000/13000 | |
| Packing(L x W x H) | m | 2.7 x 4.3 x 3.2 | 5.8 x 5.1 x 3.2 | |
| Floor space(L x W x H) | m | 2.7 x 4.3 x 3.2 | 5.8 x 5.1 x 3.2 | |
Standard Accessories | (1) Direct-coupled drive XYZ axis (2) M.P.G (3) Full splash guard (4) Spindle direct drive 10,000RPM (5) Spindle air blast (6) Spindle chiller unit (7) Spindle sound-proof (8) Automatic lubrication system (9) Coolant system (10) Rubber Stopper (11) XYZ roller type guide way | (12) Air and washing gun (13) Wash down nozzles (14) Halogen working lamp&alarm light (15) RS-232 interface +10M cables (16) Heat exchanger on electric cabinet (17) M30 auto power off (18) Leveling pads and adjusting screws (19) Tool box with adjusting tools (20) Operating manual and part list (21) Rigid tapping (22) Chain type chip conveyor |
Optional Accessories | (a) Coolant ring around spindle system (b) Coolant through spindle system (c) C.T.S with separate coolant tank (100L) (d) Upgrade spindle motor (e) 12,000/15,000/24,000 RPM HSK (f) Scraper type chip conveyor (g) Chip auger (h) Oil skimmer (i) Voltage regulator (j) Transformer (k) Seaworthy packing | |
