SQUARE TYPE
SQUARE TYPE
| MODEL | UNIT | MCV-3010G | |
| Travel | X/Y/Z axis | mm | 3000/1000/800 |
| Spindle nose to table surface | mm | 185-985 | |
| Spindle center to column surface | mm | 1080 | |
| X/Y/Z way span | mm | 660 / 3400 / 700 | |
| Position/Repeatability accuracy | mm | ±0.005 | |
| Ball bar accuracy | mm | ≧0.01 | |
| Spindle | Spindle taper | BT-50 (G) | |
| Spindle transmission | Belt (Gear) | ||
| Spindle speed | rpm | 6000 (OP.8000) / 5500 | |
| Controller | CNC control | As customer’s choice | |
| Spindle motor | kw | 18.5/22 | |
| X/Y/Z軸馬達 | kw | 7/7 x 2/ 7(O) | |
| Table | Table size (WxL) | mm | 3100 x 1000 |
| T-slots(Widthx No.xPitch) | mm | 22 x 8 x 125 | |
| Table load | kg | 4000 | |
| Feed | X/Y/Z Rapid feed rate | m/min | 16/16/16 |
| Ballscrew O/D | mm | φ63 x φ50 x φ50 | |
| Ballscrew picth | mm | 10 | |
| Cutting feed rate | m/min | 1-5 | |
| Min. input increment | mm | 0.001 | |
| Magazine | Max. tool dia./with adjacent tool | mm | φ 110 ( φ 220) |
| Max. tool weight BT-40 | kg | 15 | |
| Max. tool lengthArm/Carousel type) | mm | 350 (BT-50) | |
| Tool selection | Automatic random (Arm type) | ||
| Tool Capacity | Arm24、32、40 | ||
| Pull stud | degree | 45° | |
| Tool Changing time (T. to T.) | sec | 4.5 | |
| Others | Spindle oil chiller | l | 40 |
| Lubrication capacity | l | 2 | |
| Heat exchanger | watt | 40 | |
| Coolant tank | l | 300 | |
| Pneumatic unit | kg/cm2 | 6 | |
| Power | kva | 45 | |
Weight & Dimension | N.W./G.W.(approximate) | kg | 25000/26500 |
| Packing(L x W x H) | m | 7.6 x 3.3 x 3.5 | |
| Floor space(L x W x H) | m | 9.7 x 4.2 x 3.8 |
Standard Accessories | (1) Direct-coupled drive XYZ axis (2) M.P.G (3) Fully splash guard & Pendant operation cabinet (4) Belt Spindle 10,000RPM (5) Spindle air blast (6) Spindle chiller (7) Spindle sound-proof (8) Automatic lubrication system (9) Coolant system | (10) Air and wash down gun (11) Wash down nozzles (12) Halogen working lamp&alarm light (13) RS-232 interface +10M cables (14) Heat exchanger on electric cabinet (15) M30 auto power off (16) Leveling pads and adjusting screws (17) Tool box with adjusting tools (18) Operating manual and part list (19) Rigid tapping (20) Rulon slide-way |
Optional Accessories | (a) Cooling ring around spindle (b) Coolant throung spindle system (c) C.T.S with separate coolant tank (d) Upgrade spindle motor (e) BT-30 spindle taper (f) Direct-coupled spindle ( H type) (g) 12,000/15,000/24,000 RPM HSK (h) 16/20T carousel type ATC (i) 24/30T arm type ATC | (j) Chain type conveyor (k) Scraper type conveyor (l) Chip auger (m) Oil skimmer (n) Transiformer (o) Voltage regulator (p) Seaworthy Packing (q) Gear (G) 5500 RPM |