BRIDGE TYPE MACHINE CENTER
BRIDGE TYPE MACHINE CENTER
| MODEL | UNIT | MB-2122H/G | MB-2132H/G | MB-2142H/G | |
| Travel | X/Y/Z axis | mm | 2000/2100/800 | 3000/2100/800 | 4000/2100/800 |
| O.P.-1000 | |||||
| Spindle nose to table surface | mm | BT-50 (200-1000) O.P.200-1200 | |||
| Spindle center to column surface | mm | 450 | |||
| X/Y/Z axis way span / Linear way | mm | 1100/750/420 M55/M45/M45 | |||
| X/Y/Z ballscrew / pitch | mm | φ63xφ50xφ50 / 20x12x10 | |||
| Ball bar accuracy / position-P | mm | ±0.005 | |||
| Spindle | Spindle taper | BT-50 (HSK-100A) | |||
| Spindle transmission | Direct (H) / Gear (G) drive | ||||
| Spindle speed | rpm | 8000 (H) / G6000Hi / Low | |||
| Controller | CNC controller | As customer’s choice | |||
| Spindle motor | kw | 11/15 (H) 15/1/ (G) | |||
| X/Y/Z motor FANUC | kw | 9 / 7 / 9 | |||
| Table | Table size (WxL) | mm | 1800x2000 | 1800/3000 | 1800/4000 |
| Table load | kg | 6000 | 8000 | 10000 | |
| T-solts (widthxNo.xpintch) | mm | 22 x 12 x 150 | |||
| Feed | X/Y/Z Rapid feed taye | m/min | 15/15/15 | ||
| Cutting feed rate | m/min | 1-10 | |||
| Min. input increment | mm | 0.001 | |||
| Magazine | Max. tool dis. / with adjusting tool | mm | φ110 / φ220 | ||
| Max. tool weight BT-50 | kg | 15 | |||
| Max. tool length (Carousel type) | mm | 350 | |||
| Tool selection | ARM | ||||
| Tool capacity | 24 (32 / 40) | ||||
| pull stud | degree | 45° | |||
| Other | Spindle oil cooler | l | 18 | ||
| Lubrication capacity | l / w | 4 / 150w | |||
| Air conditioner | watt | 700 | |||
| Coolant tank | l | 400 | |||
| Pneumatic unit | kg/cm2 | 6 | |||
| Power | kva | 45 | 50 | 60 | |
Weight & Dimension | 機械重量 | kg | 22500 | 25000 | 28000 |
| 機械包裝尺寸(長x寬x高) | m | 拆機入櫃 | |||
| 機械佔地面積(長x寬x高) | m | 6.5 x 4.8 x 4.0 | 8.5 x 4.8 x 4.0 | 10.5 x 4.8 x 4.0 | |
Standard Accessories | (1) Direct-coupled drive XYZ axis (2) M.P.G (3) Full splash guard (4) Spindle direct drive 10,000RPM (5) Spindle air blast (6) Spindle chiller unit (7) Spindle sound-proof (8) Automatic lubrication system (9) Coolant ring around spindle (10) Air and washing gun | (11) Wash down nozzles (12) Halogen working lamp&alarm light (13) RS-232 interface +10M cables (14) Heat exchanger on electric cabinet (15) M30 auto power off (16) Leveling pads and adjusting screws (17) Tool box with adjusting tools (18) Operating manual and part list (19) XYZ roller type guide way (20) Rigid tapping |
Optional Accessories | (a) Coolant ring around spindle system (b) Coolant through spindle system (c) C.T.S with separate coolant tank (d) Upgrade spindle motor (e) 12,000/15,000/24,000 RPM HSK (f) 24/30T Arm type ATC (BT40/50) (g) Chain / Scraper type chip conveyor (h) Chip auger (i) Oil skimmer (j) Transformer / Voltage regulator (k) Seaworthy packing | |